LumiReader

Product introduction:

Since the measurement technique uses the "normal gravity environment", it is recommended that the particles in the sample can be clearly displayed within 1 day. The change is more suitable for this product. For highly viscous samples that are not easy to produce quickly, centrifugal acceleration equipment above LUMiFuge can be used for analysis.
The multi-spectrum LUMiReader analyzer measures the light transmittance of the entire sample at the same time; determines the stability of suspensions and emulsions in real time, accurately and directly; analyzes samples under a wide range of viscosity, temperature and concentration.
From the bottom of the sample to the surface, you can simultaneously observe and understand the stability / instability behavior of the entire system, such as suspension, sedimentation, aggregation, flocculation, etc. of the original concentration product.

main feature:

Quickly observe and understand the behavior of decentralized and responsible decentralized systems
Test stability directly
Speed up to 10x analytical phase separation
Determining the rate distribution of rapidly settling particles
Identify different mechanisms of unstable behavior
Use any disperse phase: water, oil, organic solvent, and get the particle size distribution of the system without refractive index
Calculate the density of dispersed particles
Measuring temperature up to 60 ℃
Use customizable, disposable sample tubes
Simple operation and easy to use

Application:
Comparison of sample stability, calculation of precipitation / suspension rate, calculation of Shelf-life (shelf life), determination of rheological behavior, search for the best fit of additives, calculation of overall particle density, analysis of particle size, search for PH formula, discussion of particle movement behavior ... and many more

Application areas:
Carbon Black ** Ink I Food ** Fine Chemicals ** Abrasive ** Polymer ** Pigment ** Sludge ** Slurry ** Cosmetics ** Pharmaceutical ** Bio ** Carbon Nanotubes ... More


Technical Parameters

1) Model: LUMiReader PSA
2) Light source wavelength: near infrared: 870nm, red light: 630nm, blue light: 470nm
3) Detector: 2048 CCD Sensor
4) Working temperature: room temperature ~ 60 ℃
5) The amount of sample required for measuring the test tube: 0.1ml ~ 2ml
6) Test tube type: PA 2mm light path (corrosion resistance), PC 2mm light path (for aqueous solution)
7) The number of samples that can be measured simultaneously: 1
8) Function: It can calculate the particle size distribution, understand the different particle movement under different light sources, and the absolute true value!